Annke camera dn81nb how to connect motion detect with mail

The ANKE DN81NB is a wireless IP camera that supports motion detection and email notifications. Here's a step-by-step guide to help you connect the motion detection feature with your email:

Prerequisites:

1. Make sure you have a working internet connection.
2. Ensure that your ANKE DN81NB camera is connected to your network and powered on.
3. You need to have an email account (e.g., Gmail, Yahoo, Outlook) and know your email login credentials.

Step 1: Configure Motion Detection

1. Open a web browser and type the camera's IP address (default is http://192.168.1.100 or http://anke.dn81nb).
2. Log in to the camera using the default username (admin) and password (admin).
3. Click on "Settings" > "Motion Detection" and enable the motion detection feature.
4. Set the sensitivity level to your preference (e.g., low, medium, high).
5. Set the motion detection area to the desired region (e.g., entire screen, specific area).

Step 2: Configure Email Notification

1. Click on "Settings" > "Email" and enable the email notification feature.
2. Enter your email account login credentials (username and password).
3. Set the email server settings:
   • Server type: POP3 or SMTP (depending on your email provider)
   • Server address: your email provider's server address (e.g., pop.gmail.com for Gmail)
   • Port: 110 (POP3) or 587 (SMTP)
   • Username: your email account username
   • Password: your email account password
4. Set the email notification settings:
   • Enable "Send email when motion detected"
   • Set the email subject and body to your preference

Step 3: Save Changes and Test

1. Save all changes by clicking "Apply" or "Save" buttons.
2. Test the motion detection feature by moving in front of the camera or simulating motion.
3. Check your email account to see if you receive an email notification with the motion detection video clip.

Tips and Troubleshooting:

• Make sure your email account is configured correctly and you can send emails from your account.
• Check the camera's network settings and ensure it's connected to your router.
• If you're using a firewall, ensure it's configured to allow incoming traffic to the camera.
• If you're experiencing issues with email notifications, try resetting the camera's email settings or contacting your email provider's support.

By following these steps, you should be able to connect the motion detection feature of your ANKE DN81NB camera with your email account and receive notifications when motion is detected.