How to config cp plus dvr mail alarts

CP Plus DVR Mail Alarms! Here's a step-by-step guide to help you configure them:

Prerequisites:

1. Make sure you have a CP Plus DVR system installed and configured.
2. Ensure you have the necessary login credentials (username and password) to access the DVR's web interface.

Configuring Mail Alarms:

1. Login to the DVR's web interface: Open a web browser and type the DVR's IP address (usually 192.168.1.100 or 192.168.0.100). Enter your login credentials to access the DVR's web interface.
2. Navigate to the Alarm Settings: Click on the "Alarm" or "Event" tab in the top menu bar. This may vary depending on your DVR model.
3. Enable Mail Alarms: Look for the "Mail Alarm" or "SMTP Alarm" option and toggle it to "Enable". This will allow the DVR to send email notifications when an alarm is triggered.
4. Configure SMTP Server Settings: Fill in the following information:
   • SMTP Server: Enter the name of your email provider's SMTP server (e.g., outlook.com, gmail.com, etc.).
   • SMTP Port: Enter the port number used by your email provider (usually 587 or 25).
   • Username: Enter your email account username.
   • Password: Enter your email account password.
5. Set Alarm Trigger Conditions: Configure the conditions under which the DVR will trigger an alarm. You can set triggers based on:
   • Motion Detection: Set the sensitivity level and detection area for motion detection.
   • Audio Detection: Set the sensitivity level and detection area for audio detection.
   • Door/Window Sensor: Set the sensitivity level and detection area for door/window sensors.
6. Set Alarm Notification Options: Choose how you want to receive notifications:
   • Email: Select the email address to which you want to send notifications.
   • SMS: Enter your mobile phone number to receive SMS notifications.
   • On-Screen Display: Choose whether to display the alarm notification on the DVR's on-screen display.
7. Save Changes: Click "Save" to apply the changes.

Tips and Considerations:

• Make sure your email provider allows SMTP authentication and has a valid MX record.
• Test your email settings by triggering an alarm and verifying that you receive an email notification.
• You can customize the email subject and body to include additional information, such as the camera name, event type, and timestamp.
• Consider setting up a backup email account or a third-party notification service to ensure reliable notifications.

By following these steps, you should be able to configure your CP Plus DVR to send mail alarms when an alarm is triggered. If you encounter any issues or have further questions, feel free to ask!