How to fix mail slot spring

The mail slot spring! It's a common issue, but don't worry, I'm here to help you fix it.

The mail slot spring is usually a small, coiled spring that helps to keep the mail slot open or closed. Over time, it can become worn out, damaged, or broken, causing the mail slot to malfunction. Here are some steps to help you fix a broken or damaged mail slot spring:

Method 1: Replace the spring

  1. Purchase a replacement spring: You can find replacement springs at a hardware store, home improvement store, or online. Make sure to get the correct type and size of spring for your mail slot.
  2. Remove the old spring: Use a screwdriver or pliers to carefully remove the old spring from the mail slot. You may need to gently pry it out or use a wrench to loosen any screws holding it in place.
  3. Install the new spring: Insert the new spring into the mail slot, making sure it's securely seated and aligned properly.
  4. Adjust the spring tension: Use a screwdriver or pliers to adjust the spring tension to your liking. You want the spring to be tight enough to keep the mail slot open or closed, but not so tight that it's difficult to open or close.

Method 2: Repair the spring

  1. Clean the spring: Use a soft brush or cloth to clean the spring and remove any dirt, dust, or debris that may be causing the issue.
  2. Straighten the spring: If the spring is bent or warped, use a pair of needle-nose pliers or a spring repair tool to gently straighten it out.
  3. Re-coil the spring: If the spring is loose or has come undone, use a spring coiler or a pair of pliers to re-coil it.
  4. Reinstall the spring: Once the spring is repaired, reinstall it in the mail slot, making sure it's securely seated and aligned properly.

Additional tips

I hope these steps help you fix your mail slot spring!