Mail enable ssl labs

A great topic!

To enable SSL/TLS labs on MailEnable, you'll need to follow these steps:

Prerequisites:

1. Make sure you have MailEnable installed and configured on your server.
2. Ensure that you have a valid SSL/TLS certificate installed on your server.

Step 1: Enable SSL/TLS in MailEnable

1. Open the MailEnable Management Console.
2. Navigate to Server > Settings > Security.
3. Check the box next to Enable SSL/TLS.
4. Select the SSL/TLS certificate you want to use from the drop-down menu.
5. Click Apply to save the changes.

Step 2: Configure SSL/TLS Labs

1. Open the MailEnable Management Console.
2. Navigate to Server > Settings > Security > SSL/TLS Labs.
3. Check the box next to Enable SSL/TLS Labs.
4. Configure the following settings:
   • SSL/TLS Labs URL: Enter the URL where you want to access the SSL/TLS labs (e.g., https://yourdomain.com/ssl-labs).
   • SSL/TLS Labs Port: Enter the port number you want to use for the SSL/TLS labs (e.g., 443).
   • SSL/TLS Labs Certificate: Select the SSL/TLS certificate you want to use for the SSL/TLS labs.
5. Click Apply to save the changes.

Step 3: Test SSL/TLS Labs

1. Open a web browser and navigate to the URL you specified in Step 2 (e.g., https://yourdomain.com/ssl-labs).
2. You should see a page with information about your SSL/TLS configuration, including the certificate, protocol, and cipher suite.

That's it! You should now have SSL/TLS labs enabled on your MailEnable server.