Asa mailguard asdm this

It seems like you're asking about configuring ASA MailGuard on ASDM (Cisco Adaptive Security Device Manager).

Here's a step-by-step guide to help you configure ASA MailGuard on ASDM:

Prerequisites:

1. You have a Cisco ASA device with ASDM installed.
2. You have a basic understanding of ASA configuration and ASDM.

Step 1: Access ASDM

1. Open a web browser and navigate to the ASA device's IP address (e.g., https://192.168.1.100).
2. Log in to ASDM using your credentials.

Step 2: Navigate to the MailGuard Configuration

1. In the ASDM menu, click on Configuration > Firewall > MailGuard.

Step 3: Enable MailGuard

1. In the MailGuard configuration page, toggle the Enable MailGuard switch to On.

Step 4: Configure MailGuard Settings

1. In the MailGuard Settings section, configure the following settings:
   • MailGuard Mode: Choose the desired mode (e.g., Block, Allow, or Monitor).
   • MailGuard Policy: Select the policy you want to apply (e.g., Default or a custom policy).
   • MailGuard Action: Choose the action to take when a mail message matches the policy (e.g., Block, Allow, or Log).
2. Click Apply to save your changes.

Step 5: Configure MailGuard Policy

1. In the MailGuard Policy section, configure the following settings:
   • Policy Name: Enter a name for the policy.
   • Policy Description: Enter a brief description of the policy.
   • Policy Conditions: Configure the conditions for the policy (e.g., Sender, Recipient, Subject, or Body).
   • Policy Actions: Choose the actions to take when a mail message matches the policy (e.g., Block, Allow, or Log).
2. Click Apply to save your changes.

Step 6: Save and Apply Changes

1. Click Save to save your changes.
2. Click Apply to apply the changes to the ASA device.

That's it! You have successfully configured ASA MailGuard on ASDM.